Coatings West supplies tank linings from PPG Protective and Marine Coatings. Tank linings are carefully selected for service conditions, cargo, chemistry and temperature. Coatings West along with PPG Protective and Marine Coatings technical management will only make a recommendation for coatings when all aspects of the chemistry and service conditions are known. We strongly recommend that you contact Coatings West at 714.777.0300 for a proper recommendation to meet your chemistry and service condition requirements.

Amerlock 2

Fast return to service and low temperature cure make Amerlock 2 the work horse of the potable water tank lining market.

  • Fast dry, dry to touch in 2 hours at 70°F (21°C)
  • Recoat in 3 hours at 70°F (21°C)
  • Low temperature cure down to 0°F (-18°C)
  • Exceptional corrosion protection in industrial and marine corrosive environments
  • NSF Standard 61* – For use in drinking water

Amerlock 2 Product Data Sheet

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Amerlock 2 VOC

Less than 100 grams per liter VOC.  Fast return to service and low temperature cure make Amerlock 2 VOC the work horse of the potable water tank lining systems in the South Coast Air Quality Management District.

  • Less than 100 grams per liter VOC
  • Fast dry, dry to touch in 2 hours at 70°F (21°C)
  • Recoat in 3 hours at 70°F (21°C)
  • Low temperature cure down to 0°F (-18°C)
  • Exceptional corrosion protection in industrial and marine corrosive environments
  • NSF Standard 61* – For use in drinking water

Amerlock 2 VOC Product Data Sheet

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Amercoat 68HS

Amercoat 68HS is a shop primer for bare steel on new construction or  repair projects. Amercoat 68HS can also be used as a field maintenance primer over bare steel or steel coated with organic or inorganic zinc primers and epoxy linings such as Amerlock 2, Amerlock 2 VOC, Amercoat 133, Amercoat 333, Novaguard 810 and Novaguard 840.

  • Zinc Rich Primer
  • Greater than 85% zinc in dry film
  • VOC compliant throughout California for shop application
  • VOC compliant in most areas of California for field application
  • NSF Standard 61* – For use in drinking water

Amercoat 68HS Product Data Sheet

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Amercoat 133

The solvent free solution for potable water storage and chemical storage

  • 100% solids two-component coating
  • Excellent chemical, solvent and water immersion resistance
  • Can be applied up to 1⁄2″ thick on horizontal surfaces
  • Complete tank and water pipe lining (potable, salt, waste)
  • Repair of tank bottoms, including water tanks, fuel tanks and selected chemical tanks
  • Repair of pitted steel surfaces
  • Used as a primer for Amercoat 333 edge retentive epoxy coating when a coating system with maximum edge coverage is required
  • NSF Standard 61* – For use in drinking water

Amercoat 133 Product Data Sheet

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Amercoat 333

The edge retentive solution for potable water storage and chemical storage

  • 100% solids two-component coating
  • Excellent chemical, solvent and water immersion resistance
  • Can be applied up to 1⁄2″ thick on horizontal surfaces
  • High build, edge retentive epoxy coating
  • Ballast tanks
  • Fuel tanks
  • Selected chemical tanks
  • Repair of pitted steel structures
  • Used as a topcoat over Amercoat 133 when a coating system with maximum edge coverage is required
  • NSF Standard 61* – For use in drinking water

Amercoat 333 Product Data Sheet

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Novaguard 810

Two component, single coat, solvent free, amine-cured novolac phenolic epoxy for water and chemical storage

  • Rapid cure and return to service
  • Cures down to 20 degree Fahrenheit
  • Smooth finish, light color for easy inspection
  • NSF Standard 61* – For use in drinking water

Novaguard 810 Product Data Sheet

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Novaguard 840

Two component, solvent free, amine cured novolac phenolic for water and chemical storage

  • Can be applied by single feed, heavy duty airless, 60:1
  • Smooth finish with light color for easy inspection
  • Suitable for primed steel or direct over concrete/masonry substrates
  • NSF Standard 61* – For use in drinking water

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Please call Coatings West at 714.777.0300 for more information and to obtain a PPG Protective and Marine Coatings technical recommendation provided by PPG PMC Technical.

Customer and Technical Service 714.777.0300, 8:00 AM to 5:00 PM Pacific Time Zone