Coatings West supplies tank linings from PPG Protective and Marine Coatings brands Amercoat and Sigma Coatings. Tank linings are carefully selected for service conditions, chemical usage and temperature. Coatings West along with PPG Protective and Marine Coatings technical management will only make a recommendation for coatings when all aspects of the chemistry and service conditions are known. We strongly recommend that you contact Coatings West at 714.777.0300 for a proper recommendation to meet your chemistry and service condition requirements.

Novaguard 810

Two component, single coat, solvent free, amine-cured novolac phenolic epoxy for water and chemical storage

  • Rapid cure and return to service
  • Cures down to 20 degrees Fahrenheit
  • Hydrocarbon immersion after only 1 day of cure at 68 degrees Fahrenheit
  • Smooth finish, light color for easy inspection
  • Suitable for storage of unleaded gasolines blended up to 100% ethanol (E5 up to E100)
  • Good chemical resistance against a wide rage of chemicals and solvents
  • Excellent resistance to crude oil up to 194 degrees Fahrenheit
  • Dry heat resistance up to 250 degrees Fahrenheit
  • NSF Standard 61* – For use in drinking water

Novaguard 810 Product Data Sheet

Novaguard 810 Chemical Resistance Guidance

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Novaguard 840

Two-component, solvent free, amine cured novolac phenolic for water and chemical storage

  • Suitable for heavy H2S (hydrogen sulfide) wastewater environments
  • Can be applied by single feed, heavy duty airless equipment, 60:1
  • Smooth finish with light color for easy inspection
  • Suitable for use on primed steel or direct over concrete/masonry substrates
  • Suitable for storage of unleaded gasolines
  • Good chemical resistance against a wide range of chemicals and solvents
  • Excellent resistance to crude oil up to 250 degrees Fahrenheit
  • Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes)
  • Reduced explosion risk  and fire hazard due to solvent free formula
  • NSF Standard 61* – For use in drinking water

Novaguard 840 Product Data Sheet

Novaguard 840 Chemical Resistance Guidance

*For NSF application information, please visit www.ppgamercoat.ppgpmc.com/NSF

Novaguard 890

Two-component, solvent-free, amine cured novolac phenolic epoxy tank lining for gasolines blended up to 100% ethanol (E5 up to E100) 

  • One coat tank coating system
  • Excellent resistance to crude oil up to 250 degrees Fahrenheit
  • Suitable for storage of unleaded gasolines blended up to 100% ethanol (E5 up to E100)
  • Suitable for storage of Biodiesel (EN14214)
  • Good chemical resistance against a wide range of chemicals and solvents
  • Good visibility due to light color
  • Semi-gloss smooth appearance
  • Easy to clean
  • Can be applied by heavy-duty, single-feed, airless spray equipment (60:1)
  • Reduced explosion risk and fire hazard due to solvent free formula
  • Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes)

Novaguard 890 Product Data Sheet

Novaguard 890 Chemical Resistance Guidance

 

Customer and Technical Service 714.777.0300, 8:00 AM to 5:00 PM Pacific Time Zone