Amercoat Primers                                                                Best viewed using Adobe Flash Player

PPG Protective and Marine Coatings

Ameron Performance Coatings

Precision Coatings

PSX

Amerlock

Amershield

Dimetcote

Nu-Klad

Amercoat

 High Gloss Finishes

Metallic Finishes

Epoxy Coatings

Polyurethane Coatings

Zinc Rich Coatings

Polysiloxane Coatings

High Temperature Coatings

Amercoat Primers (PPG Protective and Marine Coatings)

• Amercoat 68HS                         Call for quotation (866) 691-9601

Amercoat 68HS is a zinc rich epoxy primer that protects steel substrates by sacrificing the zinc component and also insulating the steel substrate through barrier properties.  Amercoat 68HS is designed to meet the needs of steel structures in coastal, high-humidity and offshore environments.  Amercoat 68HS can be topcoated with PSX 700, Amershield, Amershield VOC, Amerlock 400, Amerlock 2, Amercoat 240 and Amercoat 385.  Amercoat 68HS is thinned with Amercoat 65 thinner or Amercoat 911 thinner.  Please see the Amercoat 68HS data sheet or application instructions for thinning information.  

• Amercoat 240                            Purchase in two gallon unit    Purchase in five gallon unit

Amercoat 240 is and edge retentive, surface tolerant, two component, high-solids epoxy primer.  Amercoat 240 is designed to reduce edge corrosion on surfaces with angles and welds where primers usually provide the lease amount of protection.  Amercoat 240 is insulative and protects against corrosion by forming a barrier to water and salts.  Amercoat 240 can be thinned Amercoat 65 thinner.  Please see the Amercoat 240 data sheet and application instructions.

• Amerlock 385                            Purchase in two gallon unit    Purchase in ten gallon unit

Amercoat 385 is a surface tolerant, polyamide epoxy primer that is insulative and protects substrates by forming a barrier to water and salts. Amercoat 385 can be thinned with Amercoat 65 or Amercoat 911 in applications that allow 340 grams per liter or greater VOC.  Please see the Amercoat 385 data sheet and application instructions.

• Amercoat 385PA                        Purchase in two gallon unit   Purchase in ten gallon unit

Amercoat 385PA is a zinc phosphate, polyamide epoxy shop primer that provides corrosion protection through a zinc phosphate inhibitive process as well as an insulative barrier type process.  Amercoat 385 PA can be thinned with Amercoat 65 thinner or Amercoat 911 thinner in applications that allow 340 grams per liter VOC or greater.  Please see the Amercoat 385 data sheet for Amercoat 385PA data and application information. 

We recommend you consider purchasing Amercoat 65 thinner which is blended to improve the application of Amercoat 68HS, Amercoat 240, Amercoat 385 and Amercoat 385PA in varying environmental conditions.

• Amercoat 65 Thinner                  Purchase in one gallon unit    Purchase in five gallon unit

Amercoat 911 thinner can also be used to thin Amercoat 68HS, Amercoat 240, Amercoat 385 and Amercoat 385PA in varying environmental conditions.  Customers requiring non-HAPS thinners in their production facilities use Amercoat 911 thinner.

• Amercoat 911 Thinner                Purchase in one gallon unit    Purchase in five gallon unit         

Toll Free (866) 691-9601  Monday through Friday 8 A.M. to 5 P.M. Pacific Time

Privacy Statement

Send mail to webmaster@coatingswest.com with questions or comments about this web site.
Copyright © 2005 Coatings West, Inc.
Last modified: 08/05/06